Fits your existing inspection machines

Every defect, mapped at inspection and avoided at cutting.

AQC turns the inspection machines you already use into digital inspection stations. The defect map follows each roll to the cutting room.

  1. 1The AI suggests
  2. 2The operator confirms
  3. 3An instruction
  4. 4Sent through AQC
  5. 5Cut around it
Why AQC

Nothing to replace. Every defect recorded.

  • Fits your machine

    No new line, no new machine.

  • 0.5 m/s

    Visible and infrared capture.

  • One map per roll

    Every defect, to the centimetre.

  • Your level of automation

    From suggestions to automatic inspection.

The problem

With today’s inspection, even a small defect means cutting away far more fabric.

On paper or a sticker, a defect loses its exact position. So at cutting, a full-width band of fabric is written off around even a small defect.

Today: a sticker, a note, a full-width band lostWith AQC: the defect is mapped, pieces go around it

45–65%of a roll’s value is lost when it is defective

72.5%of quality control in fashion is still done by hand

How it works

One defect map, from inspection to cutting.

Infinito
Vision system (behind the machine), visible and infrared lights
Monet
Fabric projector, dimmable lights, touch plane (behind the fabric), touch screen, QR label printer
A defect is scanned by Infinito at the back of the machine, then marked with Monet at the front.
  1. Scan

    Infinito

    Line-scan cameras, visible and infrared light.

  2. Mark

    Monet

    The operator traces each defect by touch.

  3. Share

    Ariadne

    Every roll’s defect map, online.

  4. Assist

    Lucia

    AI that points to possible defects.

ROI simulator

Every defect you map is fabric you keep.

Four figures you know and three hypotheses you can change, the result in real time.

5,000
4
€12
6 min
Hypotheses

Change them to match your rolls.

30 cm
50%
70%

Calculated on a 30 cm full-width band lost per defect today, 50% of it kept with a defect map, and 70% of reporting time saved when reports come from the marking.

Partners

Built with the textile chain, from inspection to cutting.

  • Lectra
  • CPI
  • CQT Qualitex
  • Canclini
  • NVIDIA Inception

Lectra announced a strategic partnership with AQC in October 2024. Read the announcement (PDF)
AQC is a member of NVIDIA Inception.

Where we are

In Paris and northern Italy, close to the mills.

FRANCEITALYSWITZERLANDParisComoTrieste
ParisStation F5 Parvis Alan Turing75013 Paris, France
ComoVia Tevere 322073 Fino Mornasco (CO), Italy
TriesteVia del Lavatoio 434132 Trieste, Italy+39 040 3494111
Questions

What teams ask us first.

What is AQC Industry?

AQC Industry is a French company, with locations in Paris, Como and Trieste, that makes digital fabric inspection systems. AQC (Automate Quality Control) fits onto existing fabric inspection machines, records every defect with its exact position on the roll, and shares each roll’s defect map with quality, purchasing and cutting teams.

How does AQC inspect fabric?

Infinito, a set of line-scan colour cameras with visible and infrared lighting, captures the fabric as it runs at 0.5 m/s. The operator traces each defect by touch with Monet, which records its type and position. Ariadne, the web app, puts the roll’s defect map and quality report online. Lucia, the AI assistant, points to possible defects.

Do we need a new inspection machine?

No. AQC is a retrofit: it fits onto the inspection machine you already use, including older models. The cameras are modular and adapt to the width of your machine.

Can inspection be automated?

Step by step. Lucia, AQC’s AI assistant, first points to possible defects for the operator to confirm, adjust or dismiss. On suitable fabrics, inspection can then run automatically, with operator or remote validation where you want it.

How does defect data reach the cutting room?

A QR label on the selvedge opens the roll’s defect map on any phone. The same data can be sent to cutting software, such as Lectra’s, so pattern pieces are placed around the defects instead of cutting off whole bands of fabric.

Who can see our inspection data?

Each customer sees only its own data. Inspection images and defect maps remain the customer’s property, and you decide who in your supply chain can open a roll.

How much can AQC save?

The ROI simulator on the AQC home page calculates it from four figures you know: rolls per year, defects per roll, fabric value and reporting time. A test on your own rolls then measures the real values.

How does a project start?

You tell us about your fabrics, volumes and how you inspect today. We prepare a proposal for your site, then start on your own rolls so you can compare with your current inspection.

Next step

See it on your own fabric.

Tell us what you inspect today. We will show you AQC on fabrics like yours.