# Fabric inspection glossary

> Plain definitions of fabric inspection terms: inspection machine, defect map, 4-point system, selvedge, line-scan camera, common weaving defects and more.

URL: https://www.aqc-industry.com/glossary · Language: en · Last updated: 2026-11-19 · Other languages: Français https://www.aqc-industry.com/fr/glossary.md, Italiano https://www.aqc-industry.com/it/glossary.md

The words used on the inspection floor and in the cutting room, defined in plain language.

## 4-point system

The most widely used method for grading woven fabric, described in ASTM D5430. Each defect scores 1 to 4 points by length: up to 3 in (7.5 cm) 1 point, 3–6 in 2 points, 6–9 in 3 points, over 9 in (23 cm) 4 points; holes score 2 or 4. A roll is graded by its points per 100 square yards, against a limit agreed with the buyer.

## Anomaly detection

An AI method that learns what good fabric looks like and flags areas that look different, without needing examples of every defect. Lucia, AQC’s AI assistant, uses it.

## Bow and skew

Distortions of the weft: bowed when the weft curves across the width, skewed when it runs at an angle instead of straight across.

## Defect map

A record of every defect on a roll, with its type, size and position: in metres along the length and centimetres across the width. With AQC, each roll has its own defect map in Ariadne.

## Fabric inspection machine

A machine that unrolls fabric over a lit inspection table at a controlled speed so an operator can check it for defects, then rolls it up again. AQC fits onto existing inspection machines.

## Float

A yarn that skips over threads it should interlace with, leaving a loose strand on the surface.

## Flying threads

Loose fibres or yarn ends caught on the surface of the fabric or woven in by mistake.

## Foreign fibre (impurity)

A fibre or particle of another material or colour caught in the yarn or the weave, such as a coloured fibre in a white fabric.

## Hole

An opening where yarns are broken or missing, often with frayed edges. In the 4-point system a hole scores 2 or 4 points, depending on its size.

## Infrared inspection

Lighting the fabric with infrared as well as visible light. Some defects, hard to see in colour, stand out in infrared.

## Knot

The knot joining two yarn ends, woven into the fabric and standing out as a small lump.

## Ladder

A short run of broken or missing yarns ending in a small hole, which opens like the rungs of a ladder along the length.

## Line-scan camera

A camera that captures one line of pixels at a time. As the fabric moves, the lines build a continuous image of the whole roll, at constant resolution.

## Nesting (marker making)

Arranging pattern pieces on the fabric before cutting to use as little fabric as possible. With a defect map, pieces can be placed around the defects.

## Permanent crease

A fold set into the fabric during finishing, dyeing or rolling, which pressing does not remove.

## Quality-control centre

An independent laboratory or service that inspects fabric on behalf of mills and brands and issues a report for each roll.

## Roll quality report

The summary of one roll’s inspection: declared and measured length and width, defects by class and position, and a grade such as a 4-point score.

## Second choice

Fabric or garments downgraded because of defects and sold or used at a lower value.

## Selvedge

The self-finished edge running along both sides of a woven fabric. AQC prints a QR label for the selvedge so the defect map can be opened from the roll itself.

## Shade variation

A difference in colour within a roll (edge to centre, start to end) or between rolls of the same lot.

## Slub

A thick place in a yarn, woven into the fabric as a short, raised bump.

## Stain

A mark of oil, dirt, dye or another substance on the fabric.

## Thick thread

A length of yarn thicker than the rest, woven in as a raised line across or along the fabric.

## Usable width

The width of a fabric that can be cut into pieces, without the selvedges.

## Warp defect (missing end)

A fault in the yarns that run along the fabric, such as a missing or broken end. It shows as a line along the length.

## Weft bar

A band across the width that looks lighter or darker than the fabric around it, caused by a change of weft yarn, tension or pick density.

## Weft defect (broken pick)

A fault in the yarns that run across the fabric, such as a missing, broken or double pick. It shows as a line across the width.
